Silabond by Howard Berger by European Body Art
“Silabond Adhesive is as close to 355 Adhesive from the good old days as you can get. It gives me time to place a piece, be it foam or silicone, without flashing off too quickly, and once it’s down, it stays down all day. It’s a glue I use on every show I Dept. Head on. I dig it!” - Howard Berger, Makeup Dept. Head, KNB EFX Group
Silicone Based Adhesive
Water and perspiration resistant
If desired, thin Silabond with SB Thinner. Make sure joining surfaces are completely cleaned and free of any debris. Apply a thin layer of Silabond onto each surface to be bonded. Allow the solvent to evaporate until adhesive becomes tacky. Firmly press surfaces together. To un-bond surfaces or remove Silabond use EBA Vapore.